HP OneLam Laminointilaite 400 A3

89,00

HP OneLam Laminointilaite 400 A3 • Lämpenee 2-4 minuutissa • Laminoi 75-125 mic paksut taskut • Syöttöaukon leveys 330mm • Kotitoimistoille • Takuuaika 24kk

Ei varastossa (toimitusaika-arvio 2-14 arkipäivää toimittajiemme varastotilanteesta riippuen)

Ilmoita saatavuudesta

Tuotetunnus (SKU): HP3161 Osastot: , Avainsana tuotteelle

Kuvaus

HP OneLam Laminointilaite 400 A3

The modern HP OneLam 400 A3 has an intuitive function button that sets the required temperature based on the selected film thickness and this reliable assistant heats up in 2-4 minutes.

A cutting ruler, corner scraper and a 15-piece starter set consisting of three A4, four A5, four A6 and four business card sheets is supplied so that you can begin your laminating project right away. The cutting ruler and the corner scraper can be stored in a handy compartment underneath the device so that you always have the accessories at hand.

With a speed of 400 millimetres per minute, theHP OneLam 400 A3thereforelaminates an A3 document in about 60 seconds. If you have inserted the film into the laminator at an angle, this can lead to a film jam. Thanks to the roller release lever, the film can be carefully released and pulled out on the input side and the foil jam rectified.

If you forget to switch off the device via the main switch, the heating process is stopped after 30 minutes and the laminator switches to standby mode.

The device
  • Range of application: private households / hobby requirements, office workstations
  • Laminating formats: from business cards to DIN A3 format
  • Warm-up time: 2 – 4 minutes for 80 microns
  • Film thickness: 75/80 up to 125 microns or 0.5 mm thickness
  • Application: Hot and cold lamination
  • Laminating speed: 400 mm per minute
  • Backloader: fold-out lid as insertion aid on the rear side
  • Temperature: 120 – 150 degrees celsius
  • Heating system: 2 rollers are heated from the inside
  • Input width: 330 mm
  • Colour: white
The accessories
  • Cutting ruler
  • Corner scraper
  • 15-piece starter set (3 x DIN A4, 4 x DIN A5, 4 x DIN A6, 4 x business cards)
The functions
  • Function Button: On/off, 75/80 microns, 125 microns, cold
  • Temperature controlled: each film thickness has its own temperature
  • Automatic standby mode: after 30 minutes
  • ABS function: roller release lever
The operating conditions
  • Voltage: 220 – 240 V
  • Frequency: 50 / 60 Hz
  • Power: 400 W / 1.74 A
  • Motor type: AC
The logistics
  • Device dimensions: 460 mm x 140 mm x 86 mm (width x depth x height)
  • Device weight: 1.77 kg

Lisätiedot

Paino1,77 kg (kilogramma)
Pakkauksen mitat14 × 46 × 8,6 cm (senttimetri)